rcwpm jumper (military m32159) www.vishay.com vishay dale revision: 12-jul-12 1 document number: 31028 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 thick film chip resistors, zero ohm jumper, military/established reliability mil-prf-32159 qualified, type rcz features ? fully conforms to the requirements of mil-prf-32159 ? established reliability - veri fied failure rate; m level ? operating temperature range is - 55 c to + 150 c ? 100 % group a screening per mil-prf-32159 ? termination style b - tin/lead wraparound over nickel barrier ? for mil-prf-55342 chip resistors, see vishay dales rcwpm (military m/d55342) datasheet ( www.vishay.com/doc?31010 ) ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 notes ? dscc has created a series of drawings to support the need for zero ohm jumper product. vishay dale is listed as a resource on these drawings as follows: these drawings can be viewed at: www.landandmaritime.dla.mil /programs/milspec/listdwgs.aspx?doctype=dsccdwg . (1) mil case size 0705 and eia case size 0805 are dimensio nally the same. standard electrical specifications vishay dale ? model mil-prf-32159 style mil spec. sheet term. case size power rating p 70 c w current rating a maximum resistance ? rcwpm-0502-99 rcz0502 01 b 0502 0.05 1.3 30m rcwpm-550-99 rcz0505 02 b 0505 0.100 2.2 20m rcwpm-5100-99 rcz1005 03 b 1005 0.20 2.8 25m rcwpm-5150-99 rcz1505 04 b 1505 0.15 2.1 35m rcwpm-7225-99 rcz2208 05 b 2208 0.225 2.5 35m rcwpm-575-99 rcz0705 06 b 0705 (1) 0.15 2.7 20m rcwpm-1206-99 rcz1206 07 b 1206 0.25 3.2 25m rcwpm-2010-99 rcz2010 08 b 2010 0.80 5.7 25m rcwpm-2512-99 rcz2512 09 b 2512 1.0 6.3 25m rcwpm-1100-99 rcz1010 10 b 1010 0.50 5.0 20m rcwpm-0402-99 rcz0402 11 b 0402 0.04 1.2 30m rcwpm-0603-99 rcz0603 12 b 0603 0.07 1.5 30m rcwpm-0302-99 rcz0302 13 b 0302 0.035 1.1 30m dscc drawing number vishay dale model term. maximum resistance m ? max. current rating a maximum working voltage v 03011 rcwpm0201..99 b 50 0.5 30 03012 rcwpm0302..99 b 20 1.1 15 03014 rcwpm0402..99 b 25 1.2 30 88032 rcwpm0502..99 b 20 1.3 40 03013 rcwpm0603..99 b 25 1.5 50 03002 rcwpm0550..99 b 25 2.2 40 90048 rcwpm0575..99 b 20 2.7 50 90049 rcwpm5100..99 b 30 2.8 75 94011 rcwpm1206..99 b 20 3.2 100 90092 rcwpm5150..99 b 40 2.1 125 87011 rcwpm1100..99 b 20 5.0 75 90047 rcwpm7225..99 b 40 2.5 175 03015 rcwpm2010..99 b 40 5.7 150 03016 rcwpm2512..99 b 40 6.3 200
rcwpm jumper (military m32159) www.vishay.com vishay dale revision: 12-jul-12 2 document number: 31028 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? for additional information on packaging, refer to the surface mount resistor packaging document ( www.vishay.com/doc?31543 ). (1) tape and reel packaging with pl astic tape standard for all case sizes except 0 201. for the 0201 case size, the product is only offered in tape and reel packag ing with paper tape. global part number information part number (mil-prf-32159): m32159b 02mwb (preferred pa rt number format) mil style termination style spec sheet failure rate packaging m32159 b = pre-tinned nickel barrier, wraparound (see standard electrical specifications table) c = non-er m = military grade, high reliability tp = tin/lead, t/r (full) s3 = tin/lead, t/r (1000 pieces) ul = tin/lead, t/r, single lot date code wb = tin/lead, waffle tray wl = tin/lead, waffle tray , single lot date code s2 = tin/lead, t/r (500 pieces) s6 = tin/lead, t/r (300 pieces) part number (dscc drawings): rcwpm5100wb99 global model packaging (1) special rcwpm0201 rcwpm0302 rcwpm0402 rcwpm0502 rcwpm0550 rcwpm0575 rcwpm0603 rcwpm1100 rcwpm1206 rcwpm2010 rcwpm2512 rcwpm5100 rcwpm5150 rcwpm7225 tp = tin/lead, t/r (full)), plastic tape s3 = tin/lead, t/r ( 1000 pieces), plastic tape ul = tin/lead, t/r, single lot date code wb = tin/lead, waffle tray wl = tin/lead, waffle tray, single lot date code s2 = tin/lead, t/r (500 pi eces), plastic tape s6 = tin/lead, t/r (300 pieces), plastic tape ua = tin/lead, t/r (full), paper tape ud = tin/lead, t/ r (1000 pieces), paper tape uc = tin/lead, t/ r (500 pieces), paper tape ub = tin/lead, t/ r (300 pieces), paper tape 99 = 0 ? jumper dimensions in inches (millimeters) vishay dale ? model mil-prf-32159 style mil. spec. sheet a (length) b (width) c (height) d (top term) e (bottom term) rcwpm-0502-99 rcz0502 01 0.055 0.005 (1.40 0.13) 0.023 0.003 (0.58 0.08) 0.015 0.003 (0.38 0.08) 0.010 0.005 (0.25 0.13) 0.015 0.005 (0.38 0.13) rcwpm-550-99 rcz0505 02 0.055 0.005 (1.40 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.010 0.005 (0.25 0.13) 0.015 0.005 (0.38 0.13) rcwpm-5100-99 rcz1005 03 0.105 0.005 (2.67 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) rcwpm-5150-99 rcz1505 04 0.155 0.005 (3.94 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) rcwpm-7225-99 rcz2208 05 0.230 0.005 (5.84 0.13) 0.075 0.005 (1.91 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) rcwpm-575-99 rcz0705 06 0.080 0.005 (2.03 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.016 0.008 (0.41 0.20) 0.015 0.005 (0.38 0.13) d c a e b 32159b02 m mwb cwpm5100 r wb 9 9
rcwpm jumper (military m32159) www.vishay.com vishay dale revision: 12-jul-12 3 document number: 31028 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ? ? ? ? rcwpm-1206-99 rcz1206 07 0.125 0.005 (3.18 0.13) 0.063 0.005 (1.60 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) rcwpm-2010-99 rcz2010 08 0.197 0.006 (5.00 0.15) 0.098 0.005 (2.49 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) rcwpm-2512-99 rcz2512 09 0.250 0.006 (6.35 0.15) 0.124 0.005 (3.15 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) rcwpm-1100-99 rcz1010 10 0.105 0.005 (2.67 0.13) 0.100 0.005 (2.54 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) rcwpm-0402-99 rcz0402 11 0.039 0.003 (0.99 0.08) 0.020 0.003 (0.51 0.08) 0.013 0.003 (0.33 0.08) 0.010 0.005 (0.25 0.13) 0.010 0.005 (0.25 0.13) rcwpm-0603-99 rcz0603 12 0.063 0.005 (1.60 0.13) 0.032 0.005 (0.81 0.13) 0.018 0.005 (0.46 0.13) 0.012 0.005 (0.30 0.13) 0.015 0.005 (0.38 0.13) rcwpm-0302-99 rcz0302 13 0.034 0.004 (0.86 0.10) 0.021 0.003 (0.53 0.08) 0.013 0.003 (0.33 0.08) 0.007 0.005 (0.18 0.13) 0.008 0.005 (0.20 0.13) rcwpm-0201-99 0.024 0.002 (0.61 0.05) 0.012 0.002 (0.30 0.05) 0.009 0.002 (0.23 0.05) 0.006 0.003 (0.15 0.08) 0.006 + 0.002 - 0.004 (0.15 + 0.05 - 0.10) dimensions in inches (millimeters) vishay dale ? model mil-prf-32159 style mil. spec. sheet a (length) b (width) c (height) d (top term) e (bottom term) d c a e b derating curve - 55 - 25 75 100 125 150 175 120 100 80 60 40 20 0 ambient temperature in c 70 rated power in % 050 25 cage code: 91637 and sh903 mechanical specifications resistive element conductive metal encapsulation epoxy substrate 96 % alumina termination solder-coated nickel barrier solder finish tin/lead solder alloy
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
